ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   GS Boxers (http://www.advrider.com/forums/forumdisplay.php?f=3)
-   -   Where did you mount your Centech box? (R12GS) (http://www.advrider.com/forums/showthread.php?t=400329)

Rapid Dog 10-27-2008 01:48 PM

Where did you mount your Centech box? (R12GS)
 
...well?
under the tool tray area?

MeanMoe 10-27-2008 01:53 PM

I've got an 1150 and I mounted it above the air box using a Kildala plate. Alternatives are the tool area, ABS pump (if you are sans ABS) or the document area if you have a 1200.

Rapid Dog 10-27-2008 01:59 PM

thanks
 
forgot to mention R1200GS

jrodgolfer 10-27-2008 02:11 PM

On the info bracket that's at the rear of the airbox. Fits well there.

Hotspice 10-27-2008 02:25 PM

Top of the toolless tray for me..

http://hotspice.smugmug.com/photos/2..._FVrzh-M-1.jpg

AKtracks 10-27-2008 03:20 PM

Quote:

Originally Posted by jrodgolfer
On the info bracket that's at the rear of the airbox. Fits well there.

+1

JimVonBaden 10-27-2008 04:26 PM

Quote:

Originally Posted by Hotspice

Me too!

http://i20.photobucket.com/albums/b2...g/PB123016.jpg

Jim :brow

Mac 10-27-2008 07:22 PM

Right behind the tool tray, which was filled with the Autocomm and heated gear controller.

http://www.mattmccabe.com/mod-fuseblock/

http://www.mattmccabe.com/mod-wiringharness/

... and while you're at it, do yourself a favor and keep the wiring clean.

http://www.mattmccabe.com/img/R1200GSA-EMods-06.jpg

JimVonBaden 10-27-2008 07:25 PM

Quote:

Originally Posted by Mac
Right behind the tool tray, which was filled with the Autocomm and heated gear controller.

http://www.mattmccabe.com/mod-fuseblock/

http://www.mattmccabe.com/mod-wiringharness/

... and while you're at it, do yourself a favor and keep the wiring clean.

http://www.mattmccabe.com/img/R1200GSA-EMods-06.jpg

Showoff!:bluduh








:lol3

Jim :brow

stickman1432 10-27-2008 07:45 PM

Try this thread there was some good information on were to install.:thumb :ricky :ricky :ricky

http://www.advrider.com/forums/showthread.php?t=395531

Mac 10-27-2008 07:51 PM

Quote:

Originally Posted by JimVonBaden
Showoff!:bluduh








:lol3

Jim :brow


I'm just waiting for someone to show me up, so I have to tear it all out and start over again.

Hotspice 10-27-2008 08:42 PM

Quote:

Originally Posted by Mac
I'm just waiting for someone to show me up, so I have to tear it all out and start over again.

:rolleyes Like that's going to happen any time soon.

I'm still thinking of framing that image and hanging it on my garage wall for inscentive :lol3

SinCityJets 10-27-2008 09:47 PM

2 things....

1 - Mac, that shit is bad ASS!!
2 - Tom at http://www.excelcyclewerkes.com/index_files/Page577.htm has an AWESOME kit. He actually has a stainless steel mount that mounts vertically on the screw that holds the manual holder under the seat. I installed mine this weekend. Comes complete with pre wired relay. Plus he's a great guy and great customer service.

isa671 10-27-2008 10:11 PM

Quote:

Originally Posted by Mac
Right behind the tool tray, which was filled with the Autocomm and heated gear controller.

http://www.mattmccabe.com/mod-fuseblock/

http://www.mattmccabe.com/mod-wiringharness/

... and while you're at it, do yourself a favor and keep the wiring clean.

http://www.mattmccabe.com/img/R1200GSA-EMods-06.jpg

*****

My old EOD instructor would be proud! :cry

Hotspice 10-28-2008 06:45 AM

Quote:

Originally Posted by Mac

AHAAAAAAA, I think I found a flaw :lol3

Not really but I gotta ask, your relays aren't screwed to your battery are they?

:dunno


Times are GMT -7.   It's 09:41 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014