ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Parallel Universe (http://www.advrider.com/forums/forumdisplay.php?f=77)
-   -   The F800GS Seat (http://www.advrider.com/forums/showthread.php?t=415529)

M N B 12-14-2008 06:49 PM

The F800GS Seat
 
I tried both seat options out when I bought my F800GS. I went with the low height seat for two reasons. I have a 30" inseam and the normal seat had a bump right where your tailbone is, which was uncomfortable just sitting on it. I hate to think how even 60 miles would feel.

The low seat proved to be rather painful after 60-90 miles. So, being 40 miles from Corbin's Hollister factory, I went down there and had a custom seat made:
http://www.mnb-online.net/images/F800GS-Corbin.jpg

It really changes the look of the bike and it sure makes a HUGE difference in ride comfort!

10Cup 12-14-2008 07:15 PM

Seat
 
Sweet................ I have one on the way too! Can't wait.:clap

divingbiker 12-14-2008 07:21 PM

Height
 
Great looking seat.

Has the new seat changed the overall height of the seat? Can you post a photo of you sitting on the bike showing your reach to the ground. (Your inseam is the same as mine)

How much was the seat and what was the lead time for production?

I know, its a lot of questions. I took a long ride on my F8 this weekend and have GOT to do something about the seat.

Thanks

M N B 12-14-2008 07:37 PM

Quote:

Originally Posted by divingbiker
Great looking seat.

Has the new seat changed the overall height of the seat? Can you post a photo of you sitting on the bike showing your reach to the ground. (Your inseam is the same as mine)

How much was the seat and what was the lead time for production?

I know, its a lot of questions. I took a long ride on my F8 this weekend and have GOT to do something about the seat.

Thanks


I don't have a photo of me on it yet. I asked them to shave a bit off the height if he could without making it feel like sitting on a board. The web page said the stock design was halfway between the stock normal height and the low height seats and the bike is pretty tall for me with the low seat.

I've been playing with the preload on the rear shock trying to find the sweet spot between backing it out of my driveway and over the soft curb without dumping the bike and not bottoming out over bumps. Of course, once all the metal parts arrive to bolt on, all that will change again...

I got it out the door, with 8.25% sales tax and $15 shipping of my old seat back to me for under $500. The custom fitting was free of charge. I paid the web site price on the seat. The leather choice and stitching used didn't cost any extra.

I called them on Wednesday or Thursday and asked to come in on Saturday. I don't think there's much lead time, especially right now in the off season. I don't know if they premade the pan/foam base before I showed up just for me, or if they stock a few on the shelf and just grabbed one for me. It took a while before they were ready for my first fitting, so they might have built the whole thing from scratch in the back while I waited...

The changes I requested were minimal. I think it's easier to toss a leg over this seat than the stock seat due to the lower scoop. The foam is pretty hard (intentionally so) so it doesn't compress like OEM foam. This allows a better fit and much longer life. It also means the physical height is lower for throwing the leg over I think.

I still think I'm going to put a wedge under the kickstand to lift it about an inch or so since the preload increase has meant a more drastic lean when the bike is on the kick stand. It's something I'll put a great deal of thought to before I make the change (no welding will occur) because I don't want to add too much height. Having a bike fall over on it's own would be bad.

I forgot to grab the tools out of the seat before I left the old one there... They're shipping the old one back to me, but those torx wrenches would be handy right now. I have other torx, but they're shorter L-shaped type wrenches and not as good in some uses. Normally, no problem. But I have some farkles to install...

backroadsandbeyond 12-14-2008 07:52 PM

I went with the lower seat so I could fit an air hawk. It should be a super comfy ride

tmex 12-15-2008 07:09 AM

MNB, I think either your sidestand or the mounting bracket are bent. The bike is definitely leaning over way more than mine, and I have the preload jacked up near the max.

WoodWorks 12-15-2008 08:12 AM

Quote:

Originally Posted by tmex
MNB, I think either your sidestand or the mounting bracket are bent. The bike is definitely leaning over way more than mine, and I have the preload jacked up near the max.

+1

Sure looks that way to me too, MNB, unless the camera angle & lens are really distorting the image.

David

Wildman 12-15-2008 08:33 AM

Quote:

Originally Posted by M N B
I tried both seat options out when I bought my F800GS. I went with the low height seat for two reasons. I have a 30" inseam and the normal seat had a bump right where your tailbone is, which was uncomfortable just sitting on it. I hate to think how even 60 miles would feel.

The low seat proved to be rather painful after 60-90 miles. So, being 40 miles from Corbin's Hollister factory, I went down there and had a custom seat made:
http://www.mnb-online.net/images/F800GS-Corbin.jpg

It really changes the look of the bike and it sure makes a HUGE difference in ride comfort!

I've got one of those sitting the Corbin shop in Florida, waiting for me to pick it up when I'm there in January. Looks good! :thumb

DAKEZ 12-15-2008 08:45 AM

Do you plan on never leaving the pavement?
 
If so, why did you buy the GS? That huge bump (rise) is going to get in the way whenever you get off the paved roads. Nice looking bike. :thumb The seat? Not functional on a bike like that.

M N B 12-15-2008 08:56 AM

Quote:

Originally Posted by WoodWorks
Sure looks that way to me too, MNB, unless the camera angle & lens are really distorting the image.

The lens is slightly wide angle on my point and shoot, plus there is a slight decline on the concrete there, so the lean is more than it would be on a flat surface.

The service mgr checked the kickstand and bracket when it was in the shop just a few hours after this photo was taken and felt it was fine. I'd checked it as well and it feels good and strong. The flat part on the end of the stand is perfectly parallel to the ground. If it wasn't, I'd suspect it was bent.


Quote:

Originally Posted by DAKEZ
If so, why did you buy the GS? That huge bump (rise) is going to get in the way whenever you get off the paved roads. Nice looking bike. :thumb The seat? Not functional on a bike like that.

I plan on doing a decent amount of off-road riding. I've already done stand up riding on the bike and the 'huge bump' is no problem at all. I just stand up. It's very functional and extremely comfortable sitting down.

There's a big bump on the 1200GS, doesn't seem to prevent people from doing RTW trips on them...

If it becomes a problem, I can take it in to Hollister for a rework (first rework is free) and slim out the contouring.

Navaho 12-15-2008 10:08 AM

I've been waiting on my Corbin for several weeks now. I sure hope it comes in soon.

Looks like your seat is a bit lower compared to the standard one that Corbin makes.

tmex 12-15-2008 03:15 PM

While Corbin has a good reputation for quality and comfort, I have a hard time adjusting to the "look". Bikes with a Corbin seat always seem to look like a cruiser. The F8 is a dirt bike, and the style of the OEM seat reflects that image. Frankly, I have had no issues with the OEM seat at all, but I do realize that seats are a very personal thing.

HighTechCoonass 12-15-2008 05:39 PM

I have been waiting on my Corbin also...ordered about a month ago.

M N B 12-15-2008 08:35 PM

Quote:

Originally Posted by tmex
While Corbin has a good reputation for quality and comfort, I have a hard time adjusting to the "look". Bikes with a Corbin seat always seem to look like a cruiser.


I dunno, I think it looks more like a sport tourer seat than a cruiser. The stitching's a bit cruiserish, but I didn't want plain leather and that design was what was on the website, so I went for it. They'd have stitched up anything I wanted. I could have alternated magnesium and anthracite colors if I wanted...

bxr140 12-15-2008 09:19 PM

Quote:

Originally Posted by M N B
I dunno, I think it looks more like a sport tourer seat than a cruiser. The stitching's a bit cruiserish, but I didn't want plain leather and that design was what was on the website, so I went for it. They'd have stitched up anything I wanted. I could have alternated magnesium and anthracite colors if I wanted...

So...getting it without the stitching is not an option?


Times are GMT -7.   It's 01:33 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014