ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Airheads (http://www.advrider.com/forums/forumdisplay.php?f=85)
-   -   Airhead Porn - A new build by Richie Moore (http://www.advrider.com/forums/showthread.php?t=530717)

Wreford Miles 12-04-2009 02:33 AM

Airhead Porn - A new build by Richie Moore
 
1 Attachment(s)
It's also very powerfull producing 76BHP at the back wheel

Wreford Miles 12-04-2009 02:34 AM

1 Attachment(s)
Nice exhaust

Wreford Miles 12-04-2009 02:36 AM

1 Attachment(s)
From the other side

Wreford Miles 12-04-2009 02:41 AM

1 Attachment(s)
Richie know's his engines and has had long rods, pistons and valves made to his own design.

On the dyno it made 76 hp at the rear wheel and 66ft/lb at 5000 59ft/lb at 3000 - 980cc and on single plugs

grimmboy 12-04-2009 03:42 AM

That is lovely! this is what Anton should be building.

Everyone enjoy, Grimmy

AntonLargiader 12-04-2009 03:51 AM

A Monolever? Yuck. :amazon

Wreford Miles 12-04-2009 04:52 AM

Quote:

Originally Posted by AntonLargiader
A Monolever? Yuck. :amazon

Real men have straight shafts 100mm longer than most

I take it you are in favour of one which although may have more girth has a floppy end that requires additional rods to support it :D

AntonLargiader 12-04-2009 04:54 AM

:lol3 Maybe this isn't the best time to ask for better pics of the exhaust system!

Wreford Miles 12-04-2009 04:57 AM

1 Attachment(s)
Quote:

Originally Posted by AntonLargiader
:lol3 Maybe this isn't the best time to ask for better pics of the exhaust system!

I've got this one

elmoreman 12-04-2009 05:02 AM

Damn. I love it. Like, trade for a testicle love.

Marvin_ADV 12-04-2009 05:12 AM

How much does that puppy weigh?

Love it!

Wreford Miles 12-04-2009 06:36 AM

1 Attachment(s)
Quote:

Originally Posted by Marvin_ADV
How much does that puppy weigh?

Love it!

I'm not sure but my own bike (pictured) with the same size tank when full comes in at 210 Kg's

I know Richie's next bike #10 will be a light weight special (due around March I believe)

Wreford Miles 12-04-2009 06:48 AM

1 Attachment(s)
Mine (above) looks heavy on the front end beacuse it has all the rally gear, the engine in mine is complety diffrent which was built for low done torque which suits muddy English trails.

It did perfom well in the Alto Turia last May where it came 23rd and 2nd in class behind a KTM 690 - Lots of traction which you seem to be able to feed in beat by beat.

The workmanship on Richie's is in another league

Jasper ST4 12-04-2009 06:53 AM

Sweet! Mikuni Carbs or Del Orto? Do you know if it has an electronic ignition? I would like to get those plug wire end caps but I understand they are only 1k ohms. I supposedly need 5k for my Boyer.

Wreford Miles 12-04-2009 07:09 AM

1 Attachment(s)
Quote:

Originally Posted by Jasper ST4
Sweet! Mikuni Carbs or Del Orto? Do you know if it has an electronic ignition? I would like to get those plug wire end caps but I understand they are only 1k ohms. I supposedly need 5k for my Boyer.

don't know about the ignition... picture of carbs a little fussy, I was sweating being so near the bike:tb


Times are GMT -7.   It's 11:30 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014