ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   2 smokers (http://www.advrider.com/forums/forumdisplay.php?f=84)
-   -   Need some tech help for '65 YJ2 (http://www.advrider.com/forums/showthread.php?t=760177)

LotaBikes 01-29-2012 11:54 AM

Need some tech help for '65 YJ2
 
I have a '65 YJ2 that I need some technical help with. I have searched for the answers to these questions to no avail and hope someone here might be able to advise. The bike has what I beleive to be a Mikuni VM16SC carb. I need to know the correct float level height. Also, I am doing a compression and leak down test now that I have replaced the crank seals and varios o-rings that may affect air intake. What should the compression be? Lastly (for now) I need to know the correct timing and points gap. Any help on any one of these points is appreciated.

Shocktower 01-29-2012 12:07 PM

Sudco will have the float height but I do believe it is 22mm- 27mm I will PM some other info on the timing


Times are GMT -7.   It's 02:42 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014