ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Orange Crush (http://www.advrider.com/forums/forumdisplay.php?f=34)
-   -   Cracked frame! (http://www.advrider.com/forums/showthread.php?t=82334)

Blueskin950s 06-05-2005 12:49 PM

Cracked frame!
 
After reading an earlier thread about cracks in the frame I checked my own and found the same crack as described, they are at the brackets that back of the bash plate bolts onto,(can't find earlier thread, it has pic's). My dealer is going to change the complete frame, but I recall someone saying that their dealer had welded theirs, this is not acceptable,(according to KTM). So go back to your dealer and demand a new frame!

KTMax 06-05-2005 10:19 PM

Quote:

Originally Posted by Blueskin950s
but I recall someone saying that their dealer had welded theirs, this is not acceptable,(according to KTM).So go back to your dealer and demand a new frame!

This is total BS Blue... There's no need to scare people with these agitating words. Both procedures - new frame and welding - are officially approved by KTM but only if the welder is certified and approved by KTM. This is the earlier thread about it:

http://www.advrider.com/forums/showthread.php?t=70372

My frame is welded by Sommer KTM (Germany) and this is registered at KTM on the VIN # of the bike. Done almost invisible btw, excellent work. Welding takes less stripdown of the bike and the frame will be stronger than stock through some reinforcement in this area.

Mack 06-06-2005 02:52 AM

Gotta agree with KTMax.

I think it was discussed in the other thread, but I'd be more worried about the average shop messing up the frame change, (misrouting lines, incorrect torque on fastners, missing parts, etc.) then I would of a welf repair performed by a competent welder.

I would guess that KTM is just covering their butt, as IMHO, there are a lot of guys that call themselves welders that I wouldn't trust to let touch my worn out pickup muffler, let alone a bike frame. Just my .02

hogmolly 06-06-2005 05:56 AM

The KTM frame is a weldiment to begin with :deal

Blueskin950s 06-06-2005 01:18 PM

KTMax, I wasn't trying to scare anyone with my 'agitating' words, I was just repeating what my dealer had told me. I myself thought a weld would be good enough, they told me it wasn't, maybe you should ask your dealer why their advice differs from mine, and why they took the cheaper option before you say its BS. Besides, with only 3 months to run on my warranty, a new frame will be very nice, thank's.


Times are GMT -7.   It's 01:39 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014