ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Airheads (http://www.advrider.com/forums/forumdisplay.php?f=85)
-   -   Looking for a /2 bearing x-reference (http://www.advrider.com/forums/showthread.php?t=832788)

Ron Seida 10-08-2012 11:26 PM

Looking for a /2 bearing x-reference
 
Hi guys. I used to have a link to a /2 bearing x-reference page but can't find it for the life of me! It would really come in handy, not to mention save me a lot of $$$ for my current '60 R60 project... can you help a brother out :D

Detroit Steve 10-09-2012 09:18 AM

Contact Richard.


www.bmwvmca.org/

Join the club, ALL the knowledge you need and a free tool loan program of the special tools to work on your R60/2.

danedg 10-09-2012 03:47 PM

The numbers on bearings are universal. A 30407 is 30mm ID, 40mm OD and 7mm Wide.... etc. etc.. etc....
The country of origin varies, but stay away from China. Low Quality.
Check out Duane Ausherman's treatise on bearings. These things are capable of a billion miles in the right environment.
Dirt, Oil starvation, Heat, water can shorten this expectancy considerably.
Several of the bearings can be had from local sources. There are a couple that can only be found from Motorrad and Benchmark Works. :deal


Times are GMT -7.   It's 06:57 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014