ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   2 smokers (http://www.advrider.com/forums/forumdisplay.php?f=84)
-   -   Fitting RZ/Banshee intakes on an RD with 28mm carbs (http://www.advrider.com/forums/showthread.php?t=838807)

Shocktower 11-04-2012 06:01 AM

Fitting RZ/Banshee intakes on an RD with 28mm carbs
 
Ok I got new carbs for my 1979 RD 400, well having the bike sit for 28 years the stock boots where done, so I ordered new boots RZ's well the RZ boots are made for 32mm carbs and the fitting is a little loose( 2mm's ), so I fabricated some aluminum sleeves to snug up the fitting. So I turned and now fit my new sleeves boy do they fit good :D

Wish i could post pic's but I suck :cry


Times are GMT -7.   It's 01:31 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014