ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Crazy-Awesome almost Dakar racers (950/990cc) (http://www.advrider.com/forums/forumdisplay.php?f=34)
-   -   My 950 Adventure Revamp project (http://www.advrider.com/forums/showthread.php?t=846366)

airwater 12-05-2012 03:50 PM

My 950 Adventure Revamp project
 
Being too much of a consumer rather than producer on this forum over the years, it's time to put something back. I may not be the first person to do this on here but here goes...

I have a 2003 (one of the first off the production line in fact) silver version and after taking her through 8 countries, some off-roading, a bit of crashing and some wheelies here and there the bike was starting to look a it dated in terms of the colour scheme and finish. How to solve that while I still loved the ride, carbs etc without breaking the bank...

A twist of fate when my 'handiwork' managed to twist a fuel tank creating an unrepairable which needed replacing. I found an entire 990 body kit on ebay, wasn't sure if it would even fit on the 950 but took the gamble.

So here is the starting point:
https://lh4.googleusercontent.com/-L...520Clothes.jpg

And here are the tangy ingredients:
https://lh4.googleusercontent.com/--...520Clothes.jpg

Wow it's totally orange! (well the storage box is) Oh and the clocks and they came like that from the factory. Bonus!:
https://lh3.googleusercontent.com/-0...520Clothes.jpg

Starting with the easy bits first I know...it gets more complicated later. The bolt fixing points on the front fender had been changed between model years (probably due to the fender rubbing on the forks on the first bikes) so the two top fixings could only be fastened using one but that was enough. Not ideal and not particularly safe according to my dealer when I went around with the bike all done at the end. The dealer re-routed the brake lines which also did not fit in the original routing and could have caused the front to lock under heavy breaking the way I had done it. That's what a mechanic worth his salt picks up on so thanks KTM.

Some more citrus in the meantime while I build my confidence (I'm not very handy and these things). Can one be a novice for 10 years? Well I am that anywho. Now for some more citrus springling:
https://lh5.googleusercontent.com/-c...520Clothes.jpg

Now with the slightly more complicated panels:
https://lh3.googleusercontent.com/-6...520Clothes.jpg

Indicator plugs have changed between the 2003 and 2007 model years so I sawed off the plugs from the 2003 and sewed them onto the 2007 lights which were more streamlined:
https://lh5.googleusercontent.com/-p...520Clothes.jpg

Here are the new ones that I soldered to the old plugs which meant I didn't have to touch the plugs already on the bike:
https://lh5.googleusercontent.com/-K...520Clothes.jpg

OK, now they are fitted and working...barrier overcome...now where will the next one come from?!:
https://lh5.googleusercontent.com/-z...520Clothes.jpg

Now for the tanks and predictably there is a gaping fuel pump hole once I removed the FI one which got filled in with the Touratech part I bought which is massively overpriced but guaranteed to work so on went that. The tanks needed some pulling and tugging as the bikes dimensions have cleared been toyed with at KTM design central between these model years but not too much trouble:
https://lh4.googleusercontent.com/-O...520Clothes.jpg

OK, I needed some help. The peg bolts which needed removing to get the rack and then the rear panels off had rusted solid so I took it to the experts who had the tools. I don't regret this it would have been a major ball ache for me...it was just putting a bow on the project:
https://lh5.googleusercontent.com/-_...520Clothes.jpg

Here is the finished beauty. I'm well chuffed!
https://lh3.googleusercontent.com/-P...520Clothes.jpg

All in all not too much trouble and I've got a bike I'm happy to look at again, not just ride. I expect to have it for another 4 - 5 years now so I see this as good value for money.

This was my summer project seeing as we did not really have one here in the UK.

Bonsai Elephant 12-05-2012 03:54 PM

Now you just need to sort out that 990EFI inaccuracy on the side panels and you're done!

:D

airwater 12-05-2012 03:57 PM

Quote:

Originally Posted by Bonsai Elephant (Post 20185454)
Now you just need to sort out that 990EFI inaccuracy on the side panels and you're done!

:D

So change the E to a C? haha

Bonsai Elephant 12-05-2012 05:21 PM

Quote:

Originally Posted by airwater (Post 20185490)
So change the E to a C? haha

Change it all to 950<sup>NA</sup> and see who picks up on it!

:lol3

DADODIRT 12-05-2012 06:44 PM

Reminds me of a Johny Cash tune. :D

Qwik 12-05-2012 06:48 PM

Looks good. Nice Cosmetic Refresh

airwater 12-06-2012 10:14 AM

Quote:

Originally Posted by bonsai elephant (Post 20186065)
change it all to 950<sup>na</sup> and see who picks up on it!

:lol3

na?

mathews42 12-06-2012 11:24 AM

Naturally Aspirated


Looks nice! Never was a fan of the silver.

LocuL 12-06-2012 11:34 AM

Great work.

Bonsai Elephant 12-06-2012 12:42 PM

Quote:

Originally Posted by mathews42 (Post 20190904)
Naturally Aspirated

:thumb

airwater 12-07-2012 07:23 AM

Quote:

Originally Posted by Bonsai Elephant (Post 20191478)
:thumb

Should have also mentioned that the V5 registration document got changed over to the new colour no bother with no charge or no evidence requests. Also had mentioned to my insurance company that I was planning on doing this and they said it was fine because they were factory parts therefore did not raise the risk or premium as a result as opposed to had I/paint shop have got a spray can out myself and done a custom job.

KTMADV 12-07-2012 10:16 AM

I would like to buy those front head light plugs from you that you cut off.

Bonsai Elephant 12-07-2012 11:15 AM

Quote:

Originally Posted by airwater (Post 20196670)
Should have also mentioned that the V5 registration document got changed over to the new colour no bother with no charge or no evidence requests. Also had mentioned to my insurance company that I was planning on doing this and they said it was fine because they were factory parts therefore did not raise the risk or premium as a result as opposed to had I/paint shop have got a spray can out myself and done a custom job.

Which company?

This may be the first time I've heard of an insurance company not charging for something!

airwater 04-09-2013 03:36 PM

Yo, I'm with Motorcycle Direct and my premium is pretty good.

Dr LC8 04-09-2013 03:41 PM

I am collecting plastics and other aftermarket on ebay for a similar poject:wink::wink::wink:

Nic


Times are GMT -7.   It's 04:10 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014