ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   GS Boxers (http://www.advrider.com/forums/forumdisplay.php?f=3)
-   -   Torque Values (http://www.advrider.com/forums/showthread.php?t=852050)

firstwordisee 12-30-2012 07:17 PM

Torque Values
 
Anyone have the torque values for 2012 GS or know where to find them, other than BMW CD. I found this here... http://www.r1200gs.info/misc/torque.html (torque values for 2005 gs). Is it safe to assume values are same for similar components on the 2012? Thanks.

JimVonBaden 12-30-2012 07:48 PM

All of the relevant torque values are the same.

Post up what you are specifically looking for and I can verify them for you!

Jim :brow

firstwordisee 12-30-2012 07:54 PM

Thanks Jim. Nothing specific right now. I am going over the bikelater this week just to make sure everything is snug, I am at about 3K miles. I am going to order your CD too in a few weeks. I appreciate all your input on this thread and your website tutorials.

JimVonBaden 12-30-2012 08:08 PM

Stay tuned, there are a few new tutorials coming soon!:deal

Jim :brow

pcwirepro 12-31-2012 10:48 AM

Quote:

Originally Posted by JimVonBaden (Post 20361286)
Stay tuned, there are a few new tutorials coming soon!:deal

Jim :brow

Is that to say your DVD media will change? I was just about to hit you up for the combo pack before I tear into my 1150. I wouldn't want an outdated set. :ear

JimVonBaden 12-31-2012 11:01 AM

Quote:

Originally Posted by pcwirepro (Post 20364764)
Is that to say your DVD media will change? I was just about to hit you up for the combo pack before I tear into my 1150. I wouldn't want an outdated set. :ear

Not for those, they are up to date.

I will be adding a new Accessories and a new Repair DVD soon, but they will cover different subjects.

What I was really referring to are a couple of pictorials that I am going to add to my site, and on here.

Jim :brow

pcwirepro 12-31-2012 11:53 AM

Sweet

WindSailor 12-31-2012 12:06 PM

Quote:

Originally Posted by JimVonBaden (Post 20364841)
Not for those, they are up to date.

I will be adding a new Accessories and a new Repair DVD soon, but they will cover different subjects.

What I was really referring to are a couple of pictorials that I am going to add to my site, and on here.

Jim :brow

Cool.

I've got your CamHead DVD and love it.

The one thing I haven't seen here (and truthfully I haven't looked too hard) is the different torque values listed for using 'Never-Seez' or similar on bolts. Aren't those rated at 70% of original value? Granted, I understand the 'wet' value is only valid if the NeverSeez is used correctly - both sides of washer etc... at least that's what I have been told.

2005 model R1200GS Torque Values

vagueout 12-31-2012 02:24 PM

Quote:

Originally Posted by firstwordisee (Post 20361222)
Thanks Jim. Nothing specific right now. I am going over the bikelater this week just to make sure everything is snug, I am at about 3K miles. I am going to order your CD too in a few weeks. I appreciate all your input on this thread and your website tutorials.

My little system here is when i've ascertained that something is the right torque i use liquid paper/tippex etc for a small witness mark on all the bolts and nuts that matter i.e. wheels , brakes, swing arms , pivots etc. A quick walk around the bike when putting on the helmet and i can ride off in confidence.:*sip*


Times are GMT -7.   It's 02:06 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014