ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Orange Crush (http://www.advrider.com/forums/forumdisplay.php?f=34)
-   -   Jetting kit. Recognise it? (http://www.advrider.com/forums/showthread.php?t=853798)

rossguzzi 01-07-2013 02:11 AM

CPR Air Filter Jetting kit. Recognise it?
 
I just got the CPR Rottweiler air filter from Two Moto Kiwis (thanks by the way!)

I am trying to identify the needles I got with it. There are no markings I can see. My eyes arnt the best I admit so there could be markings somewhere.

With it I got 2x45, 2x56, 178, 180 jets. Clips are on the middle setting on needles.

I guess the 180 goes on the rear and I think it would be ok to just fit them and go, But I would really like to know what needles I have.

There is a steep step down about 5mm under the last groove, then a smooth taper to the end. Anyone recognise them?

I should add its going on a 03 950 Adventure. At sea level, would this set up suit? It has KTM performance pipes. Not quite as free flowing as say Akrapovic I would say.
Cheers

Two Moto Kiwis 01-07-2013 08:29 AM

Pinged you a PM as well Ross.

Adventure Machines is the kit, at least at sea level you will get full bang for buck :D

You have,

2x45 = Primaries

2x56 = Air, Bleeds

178 = Front Main let

180 = Rear Main jet

Clips are on the middle setting on needles, that is the position when we took them out at that first and the bike ran well (for the 35 mile I rode it).

Hope this helps mate, that is my total knowledge on the kit. :clap

rossguzzi 01-07-2013 06:52 PM

Great stuff. Going to install today. 40c temp so will see.

ciedema 01-07-2013 07:18 PM

Quote:

Originally Posted by rossguzzi (Post 20423274)
40c temp so will see.

Blah. I will home in a couple of weeks, not looking to the heat - Phoenix has been quite nice. (Even with Kiwis)

rossguzzi 01-08-2013 03:52 AM

Half Oztrailer burning, its sooo hot !


Fitted the air kit and jets. Goes well. Better test ride tomorrow, only 30c. :)

TcRulz 01-09-2013 05:47 PM

Quote:

Originally Posted by rossguzzi (Post 20425307)
Half Oztrailer burning, its sooo hot !


Fitted the air kit and jets. Goes well. Better test ride tomorrow, only 30c. :)

:lurk So how did it go? You've probably got 'Factory Pro' needles.

rossguzzi 01-09-2013 06:32 PM

Made by Adventure Machines I am told.
Didnt get to ride it yesterday, did the steering head bearings. Will ride today.


Times are GMT -7.   It's 01:07 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014