ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Airheads (http://www.advrider.com/forums/forumdisplay.php?f=85)
-   -   Oil filter o-ring and shim part numbers? (http://www.advrider.com/forums/showthread.php?t=853824)

Airhead Wrangler 01-07-2013 07:54 AM

Oil filter o-ring and shim part numbers?
 
I ordered a few new oil filters for the GSPD a while back from max and received only the filter itself, not the "kit" with o-rings, gasket, and shim. The fiche doesn't show part numbers for the o-rings and shims anymore. Any of you ex-parts-counter-guys/gals out there know where I can dig up part numbers to order those separately? I need #4, 5, and 6.

http://www.maxbmwmotorcycles.com/fic...png?v=08102012

Airhead Wrangler 01-07-2013 08:18 AM

oops, I was looking at the wrong sheet. Here's the correct one:

http://www.maxbmwmotorcycles.com/fic...png?v=08102012

11 11 42 1 337 098 RING - 44X4 1 $2.05

Recommend replacing when changing oil filter.
12 11 42 1 336 895 WASHER - 51.9X45,3X0,3MM 1 $0.88
14 11 42 1 337 575 OIL FILTER OIL COOLER 0.22 1 $21.30

They still don't list the block square seal that goes on the filter cover. Anybody?

craydds 01-07-2013 08:25 AM

Quote:

Originally Posted by Airhead Wrangler (Post 20418088)

They still don't list the block square seal that goes on the filter cover.

Is this what you seek? http://www.euromotoelectrics.com/pro...of-shim895.htm

craydds 01-07-2013 08:27 AM

or this? http://www.euromotoelectrics.com/pro...-gasket600.htm ?
I am not sure what you are looking at on the parts diagram.

Airhead Wrangler 01-07-2013 08:28 AM

Quote:

Originally Posted by craydds (Post 20418134)

Nope, I'm looking for the black square section o-ring. (as seen below in Anton's excellent illustration)

http://largiader.com/tech/filters/canister_sm.gif

The black one here:

http://largiader.com/tech/filters/parts_tn.jpg

craydds 01-07-2013 08:38 AM

Quote:

Originally Posted by Airhead Wrangler (Post 20418164)
Nope, I'm looking for the black square section o-ring.

Oh, sorry. Seems like that should come with the oil filter ?? Like this, http://www.euromotoelectrics.com/product-p/of-575.htm . But, I don't know anything about that setup. My filters are different.

ozmoses 01-07-2013 08:42 AM

Given the supply I purchased a few years ago my recent knowledge is nil but, max's filters always came as the kit in my experience. Confirm w/ max?

Is it possible your gaskets,etc were "borrowed" out of the box?

georgesgiralt 01-07-2013 08:45 AM

Hello !
Could it be that you had the filter for NON oil cooled bikes delivered ? These two filters looks the same but one is shorter that the other if I'm not mistaken.
This would explain that there are no seals delivered as the non cooled engines does not use them....

Airhead Wrangler 01-07-2013 08:53 AM

Quote:

Originally Posted by ozmoses (Post 20418265)
Is it possible your gaskets,etc were "borrowed" out of the box?

I don't think so, all three of them came the same, just the filter. Like you, I'd never seen the filter sold without the o-rings, shims before. It also came in a different smaller box than I'd seen before.



Quote:

Originally Posted by georgesgiralt (Post 20418300)
Hello !
Could it be that you had the filter for NON oil cooled bikes delivered ? These two filters looks the same but one is shorter that the other if I'm not mistaken.
This would explain that there are no seals delivered as the non cooled engines does not use them....

Yep, I know the differences and these definitely ARE for oil cooler bikes.

craydds 01-07-2013 08:57 AM

Quote:

Originally Posted by Airhead Wrangler (Post 20418358)
Yep, I know the differences and these definitely ARE for oil cooler bikes.

I would suggest a call to http://www.euromotoelectrics.com/product-p/of-575.htm .

Airhead Wrangler 01-07-2013 09:03 AM

Quote:

Originally Posted by craydds (Post 20418393)

WOW! A 5 pack of filters for $23.00!?! Not bad.

craydds 01-07-2013 09:07 AM

Quote:

Originally Posted by Airhead Wrangler (Post 20418455)
Not bad.

I bought some recently, the ones for non-oil cooler bikes. They are not BMW OEM filters, but appear to be good quality (subjective, I know).

Renner 01-07-2013 10:39 AM

Quote:

Originally Posted by Airhead Wrangler (Post 20418164)
Nope, I'm looking for the black square section o-ring. (as seen below in Anton's excellent illustration)

I have had no luck trying to source this o-ring independent of the filter kit.

Quote:

Originally Posted by AW
WOW! A 5 pack of filters for $23.00!?! Not bad.

the 5-pack does not include that particular o-ring.

hopefully someone will identify a source for the item :ear

craydds 01-07-2013 10:46 AM

Quote:

Originally Posted by Renner (Post 20419333)
the 5-pack does not include that particular o-ring.

This picture seems to show the o-rings with the filters - http://www.euromotoelectrics.com/product-p/of-575x5.htm . Is this deceptive advertising?

Airhead Wrangler 01-07-2013 10:58 AM

Quote:

Originally Posted by Renner (Post 20419333)
I have had no luck trying to source this o-ring independent of the filter kit.

Oh balls. :ddog

I guess I'll give Max a call and see what's what.


Times are GMT -7.   It's 04:53 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014