ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   2 smokers (http://www.advrider.com/forums/forumdisplay.php?f=84)
-   -   01 CR250 cylinder on a 97 CR? (http://www.advrider.com/forums/showthread.php?t=857519)

sect8dr 01-22-2013 11:00 AM

01 CR250 cylinder on a 97 CR?
 
Just wondering if I can put a cylinder from an 01 CR 250 on my 97 CR 250? I am thinking it will be no problem but just wanted to ask those in the know. Thanks

RUSTYtankerBEAN 01-22-2013 11:42 AM

I did a quick bike bandit check and they have different part numbers, but that is not to say that they wont work as I believe they are able to be bolted on.
Here is a great link that talks about the subject specific to the 1997. To paraphrase the link it says...92-01 will bolt on but I would check piston differences. I hope this helps.

Aaron

http://www.thumpertalk.com/topic/767...ars-will-work/

http://www.bikebandit.com/houseofmot...m2192#sch91162

http://www.bikebandit.com/houseofmot...2188#sch89 930

sect8dr 01-22-2013 12:51 PM

Thanks
 
Thanks for the link, I know that the porting is different, i will have to look into the pistons

Farmer John 01-22-2013 07:46 PM

The 01 cylinder will work fine on a 97.
They use the same gaskets & piston kit even.

Some like the 01 porting better than the massive hit of the 97's

sect8dr 01-23-2013 09:13 AM

Thats the plan
 
Just looking to smooth out the power for a better woods bike

RUSTYtankerBEAN 01-23-2013 06:18 PM

Flywheel weights will help with smoothing the power out also. I used them on my YZ125 and it made the power come on much more smoothly.

zokalr13 01-28-2013 02:07 PM

+1 on the flywheel weight -I have one on my ol CR500,anyways,I like the "all things moto" website for 2 stroke tech stuff- check it out -lots about CR250s...


Times are GMT -7.   It's 10:02 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014