ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Parallel Universe (http://www.advrider.com/forums/forumdisplay.php?f=77)
-   -   Help with footpeg measurement (http://www.advrider.com/forums/showthread.php?t=858770)

houlster 01-27-2013 11:47 AM

Help with footpeg measurement
 
Looking for some compatible footpegs. Can someone tell me what the width of the clevis for the footpegs is on an F800GS? The inside width. Trying to figure out if I can use some aftermarket pegs made for this bike.

thx
--Dan

3Rrr 01-27-2013 12:58 PM

Prescision Engineering and others
 
Quote:

Originally Posted by houlster (Post 20586778)
Looking for some compatible footpegs. Can someone tell me what the width of the clevis for the footpegs is on an F800GS? The inside width. Trying to figure out if I can use some aftermarket pegs made for this bike.

thx
--Dan

There are lots of options Pivot Pegz that rotate with your foot. Others that provide same ride height but a wider stance.

I chose Precision Engineering pegs which were almost 2"x4" for a nice large stance AND have a 2" drop. This worked well with my Rox Risers to get me where I needed to be for those longer days off road. I'm 6'2" and welcomed the drop. Hasn't been an issue for clearance. Didn't miss the rubber inserts on the hwy. Not sure if the vibration dissipated over larger surface area.

If you need the full 2" drop Precision is a great option. If not Pivot Pegz are probably the way to go. Black Dog are known to be bullet proof.

houlster 01-27-2013 02:51 PM

Quote:

Originally Posted by 3Rrr (Post 20587196)
There are lots of options Pivot Pegz that rotate with your foot. Others that provide same ride height but a wider stance.

Sorry, but my post wasn't clear. I'm looking for the clevis width for the peg mounts. I don't have a GS, just trying to figure out if the aftermarket peg options for it will work for me.

--Dan

Flashdog 01-27-2013 09:33 PM

The inside measurement of the footpeg mount clevis is .985". Just under an inch. I installed Pivot Pegs MK3's on my F700GS and they came with a spacer to make up the difference. Hope this helps.

houlster 01-28-2013 07:08 AM

Yes, thanks.

--Dan


Times are GMT -7.   It's 03:42 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014