ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   GS Boxers (http://www.advrider.com/forums/forumdisplay.php?f=3)
-   -   Story of a totaled 2006 GSA (http://www.advrider.com/forums/showthread.php?t=858785)

Britome 01-27-2013 11:45 AM

Story of Rebuilding a Totaled 2006 GSA
 
I'm going to catalog all that is being done on my son's GSA. It was a low side on ice that resulted in no human Damage but enough bike damage to warrant the insurance totaling the bike.

I took the price of the bike including 5k of farkles minus the buy back of the salvaged bike for $2,600. I also had to get a salvage title.

First step was to peel away all that was broken. Then to make my parts list. I got some used stuff off eBay and ordered the rest of the parts. There are sure to be more part orders to follow.

http://img.tapatalk.com/d/13/01/28/ezu3y5ys.jpgNew beak ordered from Beemer boneyard after the front frame assembly was bent back into acceptable shape with a crow bar.
http://img.tapatalk.com/d/13/01/28/ahygazet.jpg

valve cover cracked. These two holes had to filled with a helo coil and surrounded with epoxy.

Now waiting for the first round of parts to be delivered. If you have tips, I'm all ears. Meanwhile I'm hoping to help someone in the future who may encounter a similar challenge. Thus far the financial models are heavily in my favor.

We bought the bike from a good friend so we know all the history. Currently has 61k on the odometer.

http://img.tapatalk.com/d/13/01/28/yvaruty4.jpg

Kiwi Tinkerer 01-27-2013 03:31 PM

Great fun
 
I purchased a crashed r1200gs a couple of years ago. great fun.
I replaced the following:

Main new components I got were:
New forks. Both. - Decided not to muck about with forks. One was stuffed but other was only slightly bent.
They are light tube and I decided it could not be reliably repaired.

New bearings in front end. (Wheel bearings, steering etc.)

Found a wrecked bike in Australia. (I'm in NZ)
From wreckers I got the following:
Front frame. (Cut the frame number off the old one and glued it to new one)
Sub frame for speedo etc
Telelever from beemer boneyard. (3 day delivery from US to NZ)
=> This was from an r1200RT and was actually different to the GS. On the RT the hole for the ball joint is set slightly back. I worked out that it steepened the steering about 1 degree. You change the geometry more jacking up the shock a few turns at the back. It rode great.

I fixed/repaired a lot of components as I was happy with the quality.
Rocker covers both worn through. I got them welded up and painted. They have lost their writing but look fine.

My best tips:
1- BMW repair manual.
2- gs-911. This tool enabled me to reset the errors resulting from the crash. (ABS etc)
I included gs-911 in my budget and have kept it. Went to x-challenge after my 1200 and now have an F800gs.

It was great fun.

Dark Helmet 01-28-2013 09:29 AM

Glad everyone is ok Brian, your title worried me that you had been in an accident. Glad your son is ok.

DH

Britome 01-28-2013 01:28 PM

Quote:

Originally Posted by Dark Helmet (Post 20593561)
Glad everyone is ok Brian, your title worried me that you had been in an accident. Glad your son is ok.

DH

I appreciate your concern. All is good. On another note, I'm still looking forward to hooking up and having that conversation you wanted to have.

rgb2cmyk 01-28-2013 08:45 PM

You were able to buy yours back for $2600!? My 09 GSA was totaled in Sandy, the engine and electronics were corroded and shot (salt water), yet the insurance by back was $9000....!

Britome 01-29-2013 03:56 AM

Quote:

Originally Posted by rgb2cmyk (Post 20598337)
You were able to buy yours back for $2600!? My 09 GSA was totaled in Sandy, the engine and electronics were corroded and shot (salt water), yet the insurance by back was $9000....!

Actually, their first offer was 2650. I negotiated down to 2,200. I don't mean to gloat or rub it in. Rather, your post is confirmation that they were treating me ok. They said their buy back option was unusually low. Now I believe them.

Meanwhile... Still waiting for parts.

Britome 01-29-2013 08:39 AM

Insurance Adjustment
 
Dairyland took good care of me but I had to change carriers. They would not insure a salvaged Title. Even with accident on record, Geico was good to go.

Britome 02-08-2013 03:07 AM

When the bike crashed, all spokes were broken.

http://img.tapatalk.com/d/13/02/08/yqajy6e6.jpg

When I got it off the truck at home I thought the front axel was being hung up in the spokes Si I drove it out with a punch. Actually what happened was there were still 3 threads to go before the axel was released.

Therefore, my threads in the lower fork were jacked and the threads on the axel were jacked as well as the end being gnarled by the punch.

My dremel regrouped and shaped the axel. This mongo tap took care of the fork. All is good and waiting for the rebuilt wheel from woody's
http://img.tapatalk.com/d/13/02/08/yvusyha2.jpg

Britome 02-08-2013 03:08 AM

Front end back in order...
http://img.tapatalk.com/d/13/02/08/9abady8u.jpg

Britome 02-08-2013 03:09 AM

The old cover...

http://img.tapatalk.com/d/13/02/08/ese7uzad.jpg

eric2 02-08-2013 06:34 AM

The financial models may seem to be in your favor now, but that may turn if the engine suffered main or rod bearing damage
from oil starvation while running on its side. Does your son know if It kept running after he went down?

Looking at the valve cover damage, its hard to tell, but maybe ice hung up the rocker arms, or was in gear high enough to stall the motor and prevent further damage. Luckily, used motors are more common than used FD's and pretty cheap.

Britome 02-08-2013 07:13 AM

Quote:

Originally Posted by eric2 (Post 20677166)
The financial models may seem to be in your favor now, but that may turn if the engine suffered main or rod bearing damage
from oil starvation while running on its side. Does your son know if It kept running after he went down?

Looking at the valve cover damage, its hard to tell, but maybe ice hung up the rocker arms, or was in gear high enough to stall the motor and prevent further damage. Luckily, used motors are more common than used FD's and pretty cheap.

Engine was shut off immediately. When I adjusted the valves, compression was solid. As soon as I get my new coil, ill fire it up and let you know.

Britome 02-11-2013 05:57 PM

I found switches from an 05 gs and they were different looking than the 06 GSA. Different color orange signals and a hazard button but works perfectly.
http://img.tapatalk.com/d/13/02/12/3aha6ege.jpg
http://img.tapatalk.com/d/13/02/12/nuje5e6a.jpg

Britome 02-11-2013 05:58 PM

Upper tank bars bent and banged into acceptable shape. Saved me hundreds.
http://img.tapatalk.com/d/13/02/12/8yduhyvy.jpg

Britome 02-11-2013 06:00 PM

Put a new coil in and added 2 quarts of cheap oil to be replaced after first road test. Fired right up!
http://img.tapatalk.com/d/13/02/12/ryrepa7u.jpg
Just waiting on front wheel rebuild from woodys and ill give it a road test.


Times are GMT -7.   It's 08:52 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014