ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Trials (http://www.advrider.com/forums/forumdisplay.php?f=73)
-   -   1996 Scorpa Easy Clutch lubication (http://www.advrider.com/forums/showthread.php?t=865288)

grumpybear 02-22-2013 09:44 PM

1996 Scorpa Easy Clutch lubication
 
Bought a 96 Scorpa 250 Easy for fun but I'm doing some work on it before I get to the fun part.

In the process of replacing the 2 o rings on the clutch slave cylinder, I drained out about 2 oz's what appears to be ATF from the clutch compartment.

Any ideas what should the lube oil be for the clutch basket and the volume?

** edit: figured it out. Used ATF for clutch bath lube and ATF in the clutch master cylinder. If the Orings leak, no big deal. Filled the clutch side up through the bolt hole on the side of the clutch cover till it ran out. Played with it for a25 minute ride up and down the driveway, everything seems to be working good**

Thanks,
grump

lineaway 02-23-2013 05:57 PM

I did not think they had a seperation between the tranny and clutch. I would call Mike at the tryals shop to make sure!!

hazza 02-24-2013 12:28 AM

Scorpa Easy Fluids
 
I use automotive brake fluid in master cylinders,
Transmission oil recommended is 5W 40 not readily available, so I use 10W 40 and it works fine 650mm

grumpybear 02-25-2013 11:07 AM

Thanks,
 
Changed the transmission over to 10W40 oil, added 650CC.

Thanks for the information,
grump


Times are GMT -7.   It's 05:22 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014