ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Vendors (http://www.advrider.com/forums/forumdisplay.php?f=18)
-   -   KTM 950/990 rotopax mounting plate (http://www.advrider.com/forums/showthread.php?t=883775)

beergut 05-01-2013 07:36 PM

KTM 950/990 rotopax mounting plate
 
With lots of discussion and development, finally, a mounting option for Rotopax containers has been developed for the stock KTM 950/990 Adventure pannier racks.

This is the rack system these are designed for
http://farm9.staticflickr.com/8257/8...94d680e6_z.jpg

Mounting plates are built using 3/16" 5052-H32 aluminum, in raw finish.
http://farm9.staticflickr.com/8543/8...227ae205_z.jpg


Bolts have been recessed as the photo above shows
http://farm9.staticflickr.com/8260/8...42234280_z.jpg


Mounting design has been fully tested in Moab with full fuel containers
http://farm9.staticflickr.com/8256/8...7c6aaf72_z.jpg


http://farm9.staticflickr.com/8278/8...967fa9c0_z.jpg

http://farm9.staticflickr.com/8408/8...75701c12_z.jpg


Can be used with dry bags
http://farm9.staticflickr.com/8253/8...e3e09e1f_z.jpg

Mounting hardware
*a note on the mounting hardware*

Mounting hardware is quality stainless steel used with a locking nut. (wont rust) I believe this is a superior design ready for abuse.

It seems there is a slight difference between the 990/950 H&B pannier rack. The top bolt touches the rear fairing slightly on a 950. To me this is not an issue, to others it might. A smaller bolt would solve the issue.. I will leave that to the discretion of the buyer.
http://farm9.staticflickr.com/8115/8...278d39bd_z.jpg

Current inventory ready to ship
http://farm9.staticflickr.com/8414/8...50d6dd1c_z.jpg

Pricing

US freight:
$53/ea delivered via USPS
$93/pair delivered via USPS

International shipping:
$81/ea delivered flat rate USPS
$121/pair delivered flat rate USPS

Please contact me for my paypal address.

bikyto 05-02-2013 08:38 AM

:thumb
Good job, nicely done!
I'll be in touch.

beergut 05-02-2013 02:50 PM

A pair of rotopax mounting plates are on the way to Georgia!

bikyto, I will be waiting on your PM for payment arrangement!

beergut 05-03-2013 12:45 PM

Its almost the weekend :evil

beergut 05-03-2013 02:58 PM

I have had several people ask me if these will fit Touratech type pannier racks. To be clear, this is the style of rack they have been tested with. I have learned several inmates run Touratech/KTM branded aluminum panniers on this rack. It was my initial understanding that these are for H&B/Gobi panniers only.

If you feel they will work with a different rack, I have no problem working with you on 'trial and error' type purchases.

http://farm9.staticflickr.com/8257/8...94d680e6_z.jpg

beergut 05-04-2013 07:44 AM

When you are fueling up before you head out this weekend, think of how much more fun you could have with a few extra gallons of fuel!!!


Sent from my iPad using Tapatalk

beergut 05-05-2013 06:18 PM

A plate is making its way to Washington!

beergut 05-07-2013 05:31 AM

These can be used for many other things as well!

John_L 05-07-2013 12:36 PM

considering buying some as I'm running out of time on my mounts and haven't figured them out. Question though, how wide is the back end with the pax and the Wolfmans mounted?

Nice product.

mechanical 05-07-2013 07:12 PM

With the bags fully packed the width is 46" overall.

John_L 05-07-2013 08:07 PM

Thanks

beergut 05-08-2013 04:20 AM

Thanks Mechanical.

Inventory is starting to thin out. Another production run will likely be a 2 week wait.

I can usually ship the same day money is received.


By the way, another pair heading to Canada!!!


Sent from my iPad using Tapatalk

beergut 05-09-2013 05:32 AM

For all of you planning trips this season, don't forget to plan fuel and water!

Rotopax also makes a fantastic tool container that can be used with this mounting system!

beergut 05-09-2013 06:59 PM

These would work great with a Giantloop as well!!!

Stay tuned for some new products.

These mounting plates will not change in design.

beergut 05-11-2013 06:46 AM

1 pair and 1 single plate are all that remain.


Times are GMT -7.   It's 09:07 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014