ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Crazy-Awesome almost Dakar racers (950/990cc) (http://www.advrider.com/forums/forumdisplay.php?f=34)
-   -   undeseat oil tank for SE....??? (http://www.advrider.com/forums/showthread.php?t=926876)

Patacca 10-13-2013 03:21 PM

undeseat oil tank for SE....???
 
is that true that someone here sells underseat oil tanks for SE???

:ear:ear:ear:ear:ear

dzrtracin 10-13-2013 05:14 PM

Quote:

Originally Posted by Patacca (Post 22543790)
is that true that someone here sells underseat oil tanks for SE???

:ear:ear:ear:ear:ear

Was a 1 off

PowerCell 10-13-2013 09:55 PM

I ain't doing it Pattaca... there's just too much involved to build a complete kit. :huh


.

Dan950ser 10-14-2013 10:27 PM

Ken I think you should and do it as a skid oil tank combo. Please my bike doesn't have enough of your parts yet. Just tested your tank again on another 1200 mile Baja ride and it's great.

PowerCell 10-14-2013 11:06 PM

Skip plate, oil tank, 8 custom frame brackets, oil lines, oil line adaptors, custom mud flap and a whole new wiring harness! Piece-O-Cake...


.

dzrtracin 10-15-2013 06:42 AM

Quote:

Originally Posted by PowerCell (Post 22554560)
Skip plate, oil tank, 8 custom frame brackets, oil lines, oil line adaptors, custom mud flap and a whole new wiring harness! Piece-O-Cake...


.

Cmon Ken,
The hard part is already done:D

Kopteri 10-15-2013 09:58 AM

Yes, you can do it...:)


Sent from my iPhone using Tapatalk - now Free

Patacca 10-15-2013 03:04 PM

yes not only you can do it...BUT....we wait now even the cake!!!:D

Thanx anyhow...

Two Moto Kiwis 10-15-2013 05:30 PM

Quote:

Originally Posted by Kopteri (Post 22557146)
Yes, you can do it...:)


Sent from my iPhone using Tapatalk - now Free

Quote:

Originally Posted by dzrtracin (Post 22555808)
Cmon Ken,
The hard part is already done:D

No pressure :rofl

DRjoe 10-16-2013 04:59 AM

:lol3

Pete640 10-16-2013 06:24 AM

And an oil cooler....

Two Moto Kiwis 10-16-2013 06:27 AM

Quote:

Originally Posted by Pete640 (Post 22563719)
And an oil cooler....

Yes sounds like a recipe for hot nuts really, our seat gets warm enough already.

PowerCell 10-16-2013 10:01 AM

It's never runs hot. That underseat tray is one big oil cooler...


So, what does it take? Here's a photo review... just quickly looking through these pix I see a kit would require at the very least a custom tank, oil lines, oil line adaptors, new exhaust heat shield/rec mount, custom skid plate, right and left radiator supports, custom mud flap, support frame mounts, smaller battery and of course an EXC style wiring harness.

So, smartasses, what would you pay for such a kit? Knowing that you'd have to replace your whole wiring harness and weld on the frame? I only ask so that I can laugh and laugh and laugh... :rofl:rofl:rofl



Have a look-see...


http://farm6.staticflickr.com/5149/5...b29b3c7a_z.jpg

http://farm5.staticflickr.com/4007/4...e4b45e4f_z.jpg

http://farm7.staticflickr.com/6181/6...62efb28f_z.jpg

http://farm3.staticflickr.com/2511/4...532f2c26_z.jpg

http://farm4.staticflickr.com/3502/4...d318865d_z.jpg

http://farm3.staticflickr.com/2474/4...dde83b5f_z.jpg

http://farm3.staticflickr.com/2589/4...befc3023_z.jpg

pfdskipper 10-16-2013 10:33 AM

That oil tank is a work of art, nice job. This type of customization is way past bolt on and ride. Reality checks are in order for some inquiring minds.

MAXVERT 10-16-2013 02:38 PM

[QUOTE=PowerCell;22565169]It's never run hot at all. That big-ass underseat tray is one big oil cooler...


So, what does it take? Here's a photo review... just quickly looking through these pix I see a kit would require at the very least a custom tank, oil lines, oil line adaptors, new exhaust heat shield/rec mount, custom skid plate, right and left radiator supports, support frame mounts, smaller battery and of course an EXC style wiring harness.

So, smartasses, what would you pay for such a kit? Knowing that you'd have to replace your whole wiring harness and weld on the frame? I only ask so that I can laugh and laugh and laugh... :rofl:rofl:rofl



Would it be feasible to start with a 990 A and the parts in your
soon to be available kit, to build this SER. :D

Did you do a build thread that I missed ?

Max


Times are GMT -7.   It's 01:11 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014