ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Vendors (http://www.advrider.com/forums/forumdisplay.php?f=18)
-   -   LEDRider - Quality LED aux lighting (http://www.advrider.com/forums/showthread.php?t=926884)

JustinP 10-13-2013 03:50 PM

LEDRider - Quality LED aux lighting
 
Update 2/15/15: Current Special - $10 dimmer with our high performance LR35 and LR40 lights! See this post for details. Same deal on our LD35 lights! See this post for details.

A lot has changed at LEDRider over the last year and a half since we started this thread. We're constantly working to bring quality, high performance LED lights to market, at great prices. One thing that hasn't changed is our devotion to amazing customer service - and - we back every purchase with a no BS warranty and return policy.

Since the launch of our popular LR4, we've added a number of great units to our product line.

The LR35/LR40 Series:

http://ledrider.com/shop/?model_number=LR3540

The LR35/LR40 series of lights are the next generation of high quality multi-emitter aux lighting in our line up. These lights are built to extreme standards and feature state of the art designs. From their massive cooling fins that allow massive output, to custom engineered 3D optics for a focused beam, everything about these lights was designed to perform to the highest levels. The LR35 uses 7 Cree XT-E chips to deliver 3640 Lumens, while the LR40 uses 4 Cree XM-L2 chips for a staggering 4160 Lumens, both from a ~3 inch package! These lights offer great range and width, as the 3D optics provide a tight 10 degree center beam, with a wide angle secondary pattern.

Price: LR35 is $200/pair and LR40 is $210/pair before ADV15 coupon code

Product Specifications
Model: LR35
7x Cree XT-E LEDs
3640 Lumens
2.6 Amps @ 12 Volt DC (~31 watts)

Model: LR40
4x Cree XM-L2 LEDs
4160 Lumens
3.0 Amps @ 12 Volt DC (~36 watts)

http://ledrider.com/wp-content/plugi...89a724af0f.png

https://scontent-a-ord.xx.fbcdn.net/...76&oe=55580601

http://ledrider.com/wp-content/plugi...90ee2549cc.png



LD35 Spot:

http://ledrider.com/shop/?model_number=LD35

Our LD35 spot couples a Cree Mt-G2 Emitter with a large reflector to provide long distance lighting, and a wide field of view, from a 3 and 1/4 inch light that only uses 22 watts of power. The LD35's reach out over 803 feet at 1 Lux (1607 feet at 1/4 Lux), while also providing a wide field of view to illuminate the sides of the road. Not only does the LD35 provide amazing range, the Cree MT-G2 chip peaks at 5000 Kelvin, with a wide spectrum, to provide light that creates greater definition at night.

Price: LD35 is $200/pair before ADV15 coupon code!

Product Specifications
Model: LD35
Cree MT-G2 LED
1800 Lumens
1.8 Amps @ 12 Volt DC (~22 watts)


https://fbcdn-sphotos-d-a.akamaihd.n...45a27be89d3461

https://fbcdn-sphotos-c-a.akamaihd.n...872c216922c494

https://fbcdn-sphotos-f-a.akamaihd.n...a80c1614b6a067



LR5 High Output 5000 Lumen Light:


http://ledrider.com/shop/?model_number=LR5P

Our LR5 has been incredibly popular with bikes with big alternators :). The LR5 Hybrid Flood light uses 5 Cree XM-L LEDs to put out over 5000 Lumens, in a package that is only 4.3 inches. The LR5 series are built to take a beating, using polycarbonate lenses, polyester UV resistant powercoat, rugged metal wire inputs and sealed Deutsch connectors. The advanced optics turn night into day at the flip of a switch.

Short Web Review: http://www.doctorschierling.com/blog...ts-on-a-gl1800

Price: LR5 is $230/pair before ADV15 coupon code. That's under $200 for 10,000 Lumens of light for ADVriders!

The two pictures below show two LR5's compared to two H4 Silverstar highbeams. These were taken with a DSLR with the same manual settings. The farthest trees out on the tree line are roughly 500 feet. These lights literally turn night into day and rip through the trees! Unfortunately the trees were in the way so the full potential can't be seen.

Two H4 Silverstars: https://dl.dropboxusercontent.com/u/...1/IMG_6204.JPG
Two LR5's: https://dl.dropboxusercontent.com/u/...1/IMG_6205.JPG

Product Specifications
Model Number: LR5 Flood
5x Cree XML U2 LEDs
Custom Engineered Reflectors for 25 Degree hybrid pattern
5000+ Lumens
3.8 Amps @ 12 Volt DC (~45 watts)

http://ledrider.com/wp-content/plugi...67dfd1292b.png


http://ledrider.com/wp-content/plugi...d14c15b80a.png

LR5's mounted on a Goldwing - From the owner, "I was able to test my new LR5's on my last BBG run and wow, they are great. The really turned the night into day. They are a great addition to my HID low beams. Of course they can only be used when there is no oncoming traffic. :)".

https://fbcdn-sphotos-h-a.akamaihd.n...8e209d9f15c9d4


And of course, our original, and very popular, LR4 light that delivers tons of punch from a small package (2.15 inches diameter)

LR4 features listed below:

4x Cree XML U2 LEDs
Custom Engineered Mirrored Reflector for a Focused Beam
3500+ Lumens
2.2 Amps @ 12v
12-36 Volts DC Input
Thermal Protection
Heavy duty mounting hardware is included at no cost. These lights are well built, with an extremely solid feel; and amazing performance.

Order Link: http://ledrider.com/shop/?model_number=LR4

Side View:

https://lh5.googleusercontent.com/-k...400/side-1.jpg

Front View:

https://lh3.googleusercontent.com/-e...00/front-1.jpg

Front view mounted on Super Tenere

https://lh3.googleusercontent.com/-r...400/s10LR4.jpg

Mounted on FJR with WynPro brackets:

https://lh4.googleusercontent.com/-v...400/FJRLR4.jpg



Any questions, please post or PM. Special coupon code for ADVRider Forum members is "ADV15" - you can order using the store URLs above.

Olas 10-13-2013 04:12 PM

Just bought a pair of these from Justin. I was very impressed with the feel and quality look of these lights right off the bat. The mount they come with is beefier than what I've seen on other brands. As a bonus, you cannot beat the price either.

I'll get around to installing them this week hopefully, will report back.

JustinP 10-14-2013 11:21 PM

Quote:

Originally Posted by Olas (Post 22544087)
Just bought a pair of these from Justin. I was very impressed with the feel and quality look of these lights right off the bat. The mount they come with is beefier than what I've seen on other brands. As a bonus, you cannot beat the price either.

I'll get around to installing them this week hopefully, will report back.


Thanks for your business! Looking forward to seeing your install :)

JustinP 10-21-2013 04:01 PM

FYI Folks - We're back in stock on the LR4's. Had a few inmates waiting to order, but were out of stock on the LR4's

Here's some shot's I was able to grab the other night. Bike is on center stand. The fence is @150 feet from bike. Farthest tree in the background is between 400-500 feet. Crappy camera, non scientific 3 foot per pace measuring, for comparative purposes only. Still working on getting some more "professional" photos. The limited exposure on my camera just doesn't capture enough light for an accurate representation.

Stock FJR Low Beam (55 watt halogen)

http://i897.photobucket.com/albums/a...ps2bbacc9e.jpg

Stock FJR High Beam (65 watt halogen)

http://i897.photobucket.com/albums/a...pse00f6040.jpg

FJR Low Beam + 2 LR4 Floods

http://i897.photobucket.com/albums/a...ps764849d8.jpg

Remember to use ADV10 coupon code for 10% off :deal

JustinP 11-05-2013 11:00 AM

Here's some pictures showing the real world performance of a pair of LR4 Quad Cree XM-L U2 flood lights at 1000 feet. Compared to similar quad Cree XML lights, the LR4 has less light scatter and close in glare, and more range. The reflector design throws a beam like that of a high end flood flashlight; tight beam in the middle for range, with a secondary flood beam for a wide field of view.

Bike was in turnout on right side of road on center stand. Camera was on tripod on the left side of road. 1st tree is at 750 feet, second tree is at 1000 feet. Bike GPS was reset at the farthest tree out and ridden back and turned around where we took the pictures: https://lh5.googleusercontent.com/-c...102_235944.jpg

Note: you can click on the pictures on drop box to zoom in to full size.

First shot is stock FJR (H4) low beams with +80 Halogens:
https://www.dropbox.com/s/6u9bfo4i5q9ohd6/1low.jpg

This is stock FJR (H4) highbeams, +80% halogens:

https://www.dropbox.com/s/kkdv8k420lwq46d/2high.jpg

This is low beams plus 2 LR4 floods:
https://www.dropbox.com/s/55exx1h6o4fhgc9/3LR4.jpg

In other news, WynPro has designed let brackets for the Gen2 FJR, more info here: http://ledrider.com/lr4-light-bracke...-the-gen2-fjr/

LR4 installed on FJR with WynPro Brackets:

http://i1320.photobucket.com/albums/...psd08c4589.jpg

We are also working on developing a quality, low cost, rotary dimmer that can be used with our LED lights (and just about any other LED that does not have it's own built in dimming circuitry). We opted for the rotary design as it's simple, and does not require the use of a RF dongle that can be lost or have a dead battery. There will be a high beam over-ride on the dimmed setting. At first it will be available in a single 7 amp channel. Once we are happy with the results, we'll expand to a dual channel as well, with independent over-rides, to control multiple lights with there own settings (for example, you could set your left light to 0% with low beams, and your right to 20% - or control multiple sets of lights). We'll post up more details as they become available.

As always, coupon code ADV10 is good for 10% off for inmates :)

Chuck35 11-06-2013 06:28 AM

I installed a pair of LR4's and mini's on my FJR this weekend. They are managed by a Skene controller. These things are awesome! You could land aircraft with them. Justin was great to deal with and even shipped before he was paid when my money ended up in a Paypal loop.
Caution advised when aiming and setting up power levels. These things can be hazardous to other drivers. :flip

zgfiredude 11-09-2013 03:34 PM

Any progress on the dimmer?

:clap

JustinP 11-09-2013 04:34 PM

Quote:

Originally Posted by zgfiredude (Post 22744583)
Any progress on the dimmer?

:clap

It's moving along. I should have prototypes within two weeks. Once I sign off on the design, will be another week or two for the first shipment to come.

Olas 11-29-2013 04:57 PM

It took me a while to get to them, but I finally did the install. It was a very simple process. I am powering them through a relay that uses the high beam as its 12V switched power source. Luckily the V-strom has plenty of room for extra wiring, so you can barely it's there.

First impression is that they are super bright, even during the day. I still need to try them out in the dark, and get them aimed correctly.


http://i123.photobucket.com/albums/o...psd483d8fa.jpg

Low beam on:

http://i123.photobucket.com/albums/o...ps3e2e28da.jpg

High beam:

http://i123.photobucket.com/albums/o...ps0bc86aff.jpg

JustinP 11-29-2013 07:59 PM

Quote:

Originally Posted by Olas (Post 22886518)
It took me a while to get to them, but I finally did the install. It was a very simple process. I am powering them through a relay that uses the high beam as its 12V switched power source. Luckily the V-strom has plenty of room for extra wiring, so you can barely it's there.

First impression is that they are super bright, even during the day. I still need to try them out in the dark, and get them aimed correctly.

Thanks for the install pics. I think you may find them too bright at night mounted low on your forks and move them up higher, due to the road glare.

JustinP 12-02-2013 04:28 PM

Happy and Safe Holidays from LEDRider to the ADVrider community :). To show our appreciation we have some good news and some holiday specials :clap.

First, the good news: We've bumped our permanent ADV discount code to 15% for the ADVRider community! Use ADV15 when ordering any product from our site.

Holiday Special: Holiday special is wrapped up :)

JustinP 12-09-2013 06:50 PM

Folks - pulling the plug on this sale tomorrow. Last chance to get in on this amazing pricing. :)

ttime4four 12-09-2013 09:13 PM

Quote:

Originally Posted by JustinP (Post 22954507)
Folks - pulling the plug on this sale tomorrow. Last chance to get in on this amazing pricing. :)

Thanks for the discount - order just placed.

JustinP 12-10-2013 09:38 AM

Quote:

Originally Posted by ttime4four (Post 22955465)
Thanks for the discount - order just placed.

Thanks for your business. :)

Apparently everyone else waited till the last day too, I'm going to have a busy day :lol3.

speedbird 12-10-2013 11:13 AM

Ordered just now to take advantage of the holiday special. Thank you. Cheers.


Times are GMT -7.   It's 10:04 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015