ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Orange Crush (http://www.advrider.com/forums/forumdisplay.php?f=34)
-   -   950 rear break Brembo model number (http://www.advrider.com/forums/showthread.php?t=927814)

keener 10-17-2013 05:35 AM

950 rear break Brembo model number
 
Does any one know if there is a model number for 950's rear break caliber?

My local shop can order any Brembo parts likly cheaper than KTM but needs a model#. I need the spring that sits on top of the rear break pads.

Katoom72 10-17-2013 07:41 AM

60013018100 Retaining Plate Set Rear (Number 3 in the image) Costs like $12

http://www.partsnetweb.ru/modules/img.php?id=488_356567

keener 10-17-2013 02:30 PM

Thx, I didn't mean the KTM part number. The callipers are made by Brembo and I need the Brembo part number if there is any. My local shop can order any Brembo parts.

MortimerSickle 10-17-2013 03:22 PM

I tried shopping around for that spring, only for the front brakes.

The few I turned up cost within a few hundred thousand dollars of the price KTM wants.

keener 10-17-2013 03:40 PM

I'm looking for the rear break spring that sits on top of the break pads.

MortimerSickle 10-17-2013 03:45 PM

Quote:

Originally Posted by keener (Post 22576687)
I'm looking for the rear break spring that sits on top of the break pads.

My point was that the one for the rear will probably also be hard to find much cheaper by shopping non-KTM.

renogeorge 10-17-2013 07:27 PM

I recently got one from Munn Racing. Online


Times are GMT -7.   It's 01:03 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014