ADVrider

ADVrider (http://www.advrider.com/forums/index.php)
-   Airheads (http://www.advrider.com/forums/forumdisplay.php?f=85)
-   -   88 R80GS top box mount (http://www.advrider.com/forums/showthread.php?t=971361)

V4Moto 04-19-2014 08:37 AM

88 R80GS top box mount
 
I have been looking at that standard rack and wondering how to get a box on to it and still have access to the seat lock. I would hazard a guess that it has been done before (quite a few times) so I am interested in how. I am sure that there are some adapter plates out there and some decent home made designs.

My preference is always towards the budget end but interested in anyone's experience in fitting a top box to the BMW rack that is integrated into the subframe. :ear

SOLO LOBO 04-19-2014 03:08 PM

Stolen from a craigslist posting:

http://images.craigslist.org/01212_9...gG_600x450.jpg

http://images.craigslist.org/00I0I_6...X5_600x450.jpg

https://seattle.craigslist.org/see/mcy/4427600538.html

V4Moto 04-21-2014 06:52 PM

Interesting - wonder it it has a bespoke mounting plate or a homemade adapter to mount the box. Still havent figured one out for mine but that may have to become a winter "project"

Screaming Chicken 04-22-2014 01:39 AM

There's always this option...

http://rubberchicken.nl/pics/flatrack.jpg

V4Moto 05-02-2014 10:10 AM

Now that looks like my original subframe/rack, will have to devise a way to plate it high enough to be able to get the key in the seat lock but no higher so the box is as low as I can get it. Cheers

squish 05-02-2014 10:40 AM

Quote:

Originally Posted by V4Moto (Post 24074317)
Now that looks like my original subframe/rack, will have to devise a way to plate it high enough to be able to get the key in the seat lock but no higher so the box is as low as I can get it. Cheers

I've got an R80ST and I used to have a girlfriend who if she wanted to ride on the bike she had to have a back rest.

I spent some time trying to figure out the best way to make a mount that wasn't permanent, wasn't super ugly, and that I could mount a Givi monokey plate to.I had no welding or serious fabrication tools,
I was also pretty broke,

The idea I came up with was clamps for the forward grab handle
Then extruded aluminum box tubes notched at the bottom to fit around the cross bar of the rack. "L" brackets at the top

I used a hose clamp that held the square tube down onto the rack.
For the "L" brackets I used steel, since it was slightly more forgiving for vibrations and I didn't want it to fail at the corner of the "L" bracket.

V4Moto 05-02-2014 05:06 PM

Nice idea Squish, thats the kind of thing i was looking for, I will probably experiment with something close to that, good to know its been done

squish 05-04-2014 12:17 AM

Quote:

Originally Posted by V4Moto (Post 24076967)
Nice idea Squish, thats the kind of thing i was looking for, I will probably experiment with something close to that, good to know its been done

Thanks, it was pretty and we didn't go out very long so there wasn't photos taken of the set up or I would have posted em up. It was up to normal top box weight holding and didn't shift around too much, but the weight was high on the bike and further aft then I like it to be.


Times are GMT -7.   It's 09:29 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014