I decided to join because I am embarking on another IT465 project.
The original is chronicled here:
Well I started racing enduros over the past 2 years, and this bike has been neglected, so I decided that I am going to turn it into a supermoto/street tracker project.
The project should go quick....a frame powder coat, new top end, collect some parts, and then lower the suspension. Then a little paperwork magic....
Hopefully I will have the street version of an IT465 in just a few weeks!!
Any ideas or suggestions would be great!!
I have a new Clarke tank in White, and I am planning on doing the frame in white, and to try and get a nifty seat/tailpiece ala cafe racer. Some rearsets, street tires, and maybe freshen up some of the aluminum bits...a VERY BUDGET, VERY SCARY street bike....hopefully I won't bend the connecting rod twisting the throttle too far!