From the FWIW dept., just to muddy up the waters, here's what I got from my mech. He talks about a 10 min instead of 15 minute idle after ECU reset........
"The "10" min. process comes from KTM's Technical Services group. Your are correct that the manual calls for "15" min. This was the process first applied when the F.I. bikes came to market. During the first year of introduction, the service schools started teaching the "10" min. process. Bottom line, when watching the ECU on the remote computer you can see that the ECU settles down around the "5" min. mark. Very little to no change occures after this point."
Riding the Americas: No Fumar Espaņol