Rox Risers install on a R1200GSA
View Single Post
08-16-2009, 07:30 PM
Joined: Sep 2008
The reprom says 40Nm tightening torque on the fork bridge mounting nuts... plus to replace the nut. Also says 28Nm tightening torque on the BMW handlebar risers... only gap at rear as viewed from sitting on bike.
Tour of the Americas: August 16, 2010 - present
brianstanfill screwed with this post 08-16-2009 at
View Public Profile
Visit brianstanfill's homepage!
Find More Posts by brianstanfill