View Single Post
Old 08-17-2009, 09:32 AM   #35
Wallowa
Beastly Adventurer
 
Joined: Nov 2006
Location: NE Oregon
Oddometer: 5,282
Which "Electrical"?

Quote:
Originally Posted by mobe
I pulled the tank on my 07 GSA and pulled up some extra slack on the wiring.
I ordered the fog light mounting bracket for an 06 GSA and mounted the fog switch on the right behind the master cylinder.
I had Speigler make up a custon 2 inch longer front brake line. Bleeding the 07 and up abs is as easy as a non-abs bike.

I also did not like the angle of bend being transferred to the brake lines and cables at full lock with them routed behind the top clamp.
I felt that their lifespan would be considerably shortened by being bent to those angles on a regular basis.
I think that in a few years we are going to see "mysterious electrical problem on GSA equipped with rox risers" threads when the wires begin breaking from the stress!


The fog bracket was 3 bucks and speigler charged 60 bucks for the brake line.

63 bucks to do it right.
Curious..which electrical do you believe will be damaged over time due to the flexing/stress? Want to watch out for potential problems..thanks.
__________________
"In Wallowas"
====================
2007 R1200GS Adventure " ...to explore off-road, alone in my case, way out in the boonies...that feeds the soul!" After 2014 BOM my bike is forthwith the "GS McGee"!
Wallowa is offline   Reply With Quote