Pics courtesy of Indy
Originally Posted by Indy Unlimited
I drilled and tapped the swing arm for the mount of a 1 x 1 x 1/8" aluminum angle. I hand drilled it and tapped it with the wheel on and the bike on the side stand. There is over 1/2" thick aluminum to drill thru on the heavy bosses on the swing arm. No need to weld anything!
:: Furious Basterds: Velox, Vehemens, Oblivio
:: "For those who don't understand, no explanation is possible. For those who do, none is necessary."
Bartron screwed with this post 12-28-2009 at 09:31 PM