ADVrider - View Single Post

Twin headlight Ernie · 11-23-2009, 03:11 PM

Hi Thraan,
The clutch arm is a very easy installation. Remove the cable at the clutch arm. Clean the area around the shaft seal so no dirt drops in. Rotate the clutch arm counterclockwise about a 1/4 turn and it will lift right out. Install the new arm and readjust the cable to spec. It's about as simple as it gets.
Thanks for asking. 2HE

11-23-2009, 03:11 PM	#3
Twin headlight Ernie ^OP bar napkin engineering Joined: Aug 2005 Location: Dakota Minnesota Oddometer: 1,281	KLR650 clutch arm Hi Thraan, The clutch arm is a very easy installation. Remove the cable at the clutch arm. Clean the area around the shaft seal so no dirt drops in. Rotate the clutch arm counterclockwise about a 1/4 turn and it will lift right out. Install the new arm and readjust the cable to spec. It's about as simple as it gets. Thanks for asking. 2HE __________________ Motorcycles are my life. Not my lifestyle. My Smugmug: http://twinheadlighternie.smugmug.com/ Dakota Motorsports