I've posted this request before several months ago. I thought I had scored a usable master cylinder off evilbay, but turns out that one is pitted beyond use too.
So I'm back to square one, in need of a good, usable rear master cylinder for a 1975 Guzzi T-3. Many tonti framed bikes used this type MC, up til about 1980 will work I think.
I have a rebuild kit on hand, so it doesn't have to be perfect, just have a good bore. I could go the sleeve route but would rather not.
This is the type I'm looking for:
PM me if you have one available and thanks in advance!