I think I see why Husky didn't make their stand available. It works but the stand was not designed very well. I made some changes and it works but it is not perfect. The problem is the side stand. There is just not enough room to fit the two together perfectly. There is some manipulation of the side stand and the center stand to get them up and down. But it is not too bad, IMO. Basically you will need to move both stands downward to get the side stand down. Once the side stand is down the center stand works fine. One of the easier bikes to get up on the stand. Stepping on the press down leg and lifting from the rear rack or rear section of the bike will get the bike up easily.
$80.00 plus shipping. Stands a primered and painted with rattle can paint. Will sell unfinished for $75.00 plus shipping. Unfinished stand shown in above pictures.