If it is the model year that has the factory installed mount it will not be a problem. Send me a PM and I will tell you how to get the measurement I need. I will be able to make one the height you need.
I will do that modification on any stand I make. There is always some difference between the height of the bike due to the different choices of tires. I have picked a middle ground for the heights. My XRL650L has a higher profile front tire but a lowering link on it. It works out about the same as a stock bike in height as far as rear wheel ground clearance when on the stand. The standard stand will work on most bikes unless they have been significantly lowered or SM'ed.
Originally Posted by nugget
My 06 610 is lowered two inches at the shock. Do you think the center stand would still work?