Originally Posted by alansz400
My front brakes on my 2001 didnt work real good when I bought the bike about a month ago. I could pull the handle all way back to the grip if I pulled real hard. I tried getting the air out of the system even used the vaccum pump to pull the air out but it didnt seem to help. I read on some other sites that other guy have the same problem so I bought a complete used front brake system off ebay from a DR650. I was going to put the master cyl. and the line on but thought I would try the master cyl. first. after bleeding the system I now have 100% better feel in the handle and alot more stoping power. I can lock the front wheel up on dry black top. The 650 banjo bolt also has alot bigger hole in it. Hope this helps. Alan
My KLR never went fast enough to need a front brake.
"I only wish I had video running when WSD did a no footed can-can over some boulders on mainline....two feet of air easy..." -Abdelhub
Yeah, on the GS http://vimeo.com/3232838
Notable Past-'01 KLR 250, 95 R1100GS, 06 KTM 950 SM, 69 Bridgestone 90