View Single Post
Old 08-29-2010, 04:32 PM   #1
ebrabaek OP
Beastly Adventurer
 
Joined: Jan 2010
Location: Grand Valley, Colorado
Oddometer: 4,672
Wicked How to make your own Carbon Fiber fairing....

Ok......So I started a little early.............But I was going back and forth about making a dashboard to mount the instruments in......or make a new sub frame to host said instruments.... My goal is to move them 1 1/2 inch to the right. They are not centered....for my taste......he-he. My current setup with the gps could move a little to the right..... I`d like to keep it like this.....imho....a more oem look.....and less rattle and vibes for the gps.....


Right now I think it`l be too much trouble to re-make the sub frame in CF.... I did`nt realize it went way down along the sides......arrrrgggg. So I decided to make a CF plate that raises the cluster about 1 inch towards the rider......and moves it 1 1/2 inch to the right......


Soooooo while it is hardening over night.......I will think up some designs.....methinks..... In the am.....off to hobbylobby for the foam, and I just realized I need more CF fabric. Ohhhhh....well.....One thing at a time......Until then.......


Erling

ebrabaek screwed with this post 08-29-2010 at 05:06 PM
ebrabaek is offline   Reply With Quote