Some Quirks, Unspecified Data
I, too, am interested in this device, as: 1) I received the Aerostich catalog in today's mail, and; 2) I was thinking about cleaning up my accessory wiring as a Winter project.
However, I have at least one reservation regarding the PDM60 so far. This concerns circuit 1, the circuit that can be controlled by a user-supplied switch. If I understand the documentation correctly (thanks, John Smallberries, for posting that), that circuit is always hot if you enable it to be externally switched. This means, in what I see as a real-world typical application, that someone could come along, hit the switch to turn on your added driving lights on your parked bike, and walk away (or, you, yourself, could forget to turn them off). Right?
Now, you could always add a relay to, say, one of the other two 15-amp circuits, and a switch to the relay trigger, but this sort of defeats one of the major advantages of the electronics of this gizmo.
A couple of other comments. Unless I'm having a senior moment or two, I don't see any specs regarding the lengths of the included wires (the ones built into the connector). Be nice to know that; this would determine how many posi-lock connectors (or similar) you'd need to be working with, to connect all your added farkles.
Last, I'd also like to see some documentation regarding both the type of ground connectors provided and the min/max range of wire sizes they can accommodate. That is, are we talking about screw-downs on the wires, slip-over blade connectors, etc.?
Executive summary: I think it's an interesting concept, I think it has at least one flaw - the user-switchable circuit - and I'd like more details.
Bill P. screwed with this post 11-23-2010 at 09:07 PM