Originally Posted by itsatdm
If I understand what he is trying to say is, how far can you raise the fork in the triple clamps. The forks have a wasp like shape below the upper clamps. When mounted according to BMW specs, there is about 18mm below the upper clamp before the fork tube narrows. You can go higher but the top clamp will not have full contact.
Yeap that is what I wanted to know, I would be looking to bring the forks up through the triples a bit to help with lowering a bit, obviously can't go to far as it will bugger the geometry.
So yeap need to know how far down the effective flat spot if you like extends down the fork leg from the top and bottom clamp or the parallel or square length machining on the fork tube so the top and bottom triple will bolt back onto nicely before the taper on the leg.