View Single Post
Old 12-26-2010, 12:18 AM   #22
NordieBoy
Armature speller
 
NordieBoy's Avatar
 
Joined: Dec 2006
Location: Kiwiland
Oddometer: 7,000
Quote:
Originally Posted by BergDonk View Post
I had a DJ 150 in it and wanted it a bit leaner. Its the smallest the kit comes with. I found an old Mikuni main in my bits and drilled it to 145 with a drill. It feels leaner than the DJ 150, and gave me what I was after.

I could have soldered up a DJ jet and drilled it out, but I already had the Mikuni jet, so I thought I'd experiment and see what happened. All seat of the pants stuff though, so who knows.

I also neglected to add that the pipe comprises a FMF Powerbomb header and Megacycle muffler and tailpipe.

Steve
The DJ 150 is the same as a Mikuni 142 I thought?

A DJ 155 would be about right with a bit of altitude and/or not much air box cutting.

I was running a larger pilot (+2) and pilot air (+1) too.
NordieBoy is offline   Reply With Quote