Thread: Pablo's DR350
View Single Post
Old 01-20-2011, 11:45 AM   #75
3uba296's Avatar
Joined: Aug 2010
Location: Sweden
Oddometer: 134
Originally Posted by pablo83 View Post
I'm removing the manual decomp from this bike. Where do I find a plug to cover the hole in the valve cover?
Three ways to go..

1: I did this om my -97 head with autodecomp that fore some reason had the manual decomp axle to. Since I had the cover loose I removed the seal, drilled the hole (with a stationary drill) to 10.5mm and tapped for M12 and loctited a M12 stop screw into it.

2: If you donīt have the stuff to do this, simply keep the seal and modify (cut of) the part of the shaft that engages with the cam shaft.

3: Remove the seal and plug the hole with a plug. Where to get it? Dunno. Thatīs why I did it my way.
3uba296 is offline   Reply With Quote