View Single Post
Old 01-29-2011, 04:47 PM   #39
Ian B OP
Fairing Manufacturer
 
Joined: Oct 2004
Location: BC
Oddometer: 582
Quote:
Originally Posted by mototifosi View Post
Ian,
what do you have for the 08 EXCR 530's? Use the 690 set up? Generic? Coming out with another for the KTM's? Does anyone out there have pics of the Lynx set up on KTM's ? Can ya'll post more pix of what you did with the dashes and other bikes please? I have seen the 690 which looks sweet....
Thanks in advance...
OK, this is probably a bit confusing, because it's not on the website yet, but there are going to be 2 fairings for KTM's. One is 690 specific and comes with specific instructions on fitting to that bike and a dashboard that is pre-drilled for the relocation of the speedo.

The other will be 'KTM Generic'. This is the same fairing/screen as the one shown here (690), but it will have less specific instructions and the dashboard will be left 'clear' for guys to relocate their OEM or aftermarket speedo wherever they like. The instalation is not difficult and does not require any drilling or cutting on the bike. The fairing locates straight onto the two drilled holes on the top surface of the bottom triple clamp on virtually all KTM's. The other mounting point is where the dash clamps under the handlebar risers as with any other Lynx. There are no photos of this fairing as the first ones have only just gone out this week (both in black and orange), but you will get the general look of it from the 690 pics.

The fairings are available in Black (shown here with the included orange decals) or plain orange. All Lynx's cost the same and all can have the same combos of HID's and headlight protectors etc.

450 and 530 owners need to be aware that without a rewound stator, they will have to have twin HID's for the lower power draw.

Ian
__________________
www.britanniacomposites.com
Ian B is offline   Reply With Quote