View Single Post
Old 01-30-2011, 10:51 PM   #1
Promach 1 OP
Promach 1
Promach 1's Avatar
Joined: Mar 2007
Location: NW Montana, Flathead valley
Oddometer: 224
Thumb R1200 Front Axle Tool and Spark Plug Cap Tool Combination

This is a hex tool for the front wheel and a spark plug cap removal tool. The hex tool will also fit the the plastic oil cap. These tools fit together with an o-ring around the hex tool, to give it a friction fit inside of the spark plug tool. It's 1.5" long and 1.25" in diameter, and only weighs 1.8 ounces. The hex tool has been tested to 100 ft. lbs of tourqe, with no distortion. This is over twice the amount of tourqe needed for the GS/RT wheel.

You can also buy the Spark Plug tool and the Hex tool separately.

The Hex Tool will also fit the Suzuki DL1000 Vee Strom.

For more infomation please visit our website @:
Don't forget to "Like" our Facebook Page:
Also check out our YouTube video @
Attached Images

Promach 1 screwed with this post 02-01-2013 at 09:28 AM
Promach 1 is offline   Reply With Quote