View Single Post
Old 02-19-2011, 04:19 AM   #81
-GUV-
Gnarly Adventurer
 
Joined: Feb 2006
Location: QLD Australia
Oddometer: 237
Quote:
Originally Posted by Sobiloff View Post
I read this procedure elsewhere and haven't tried it myself, but I figured I'd pass it on in case you're adventurous enough to try it:

*Remove old Odometer and the connector.
*Cut the wire for pin 18 (should be Brown/Grey for 690E) on the connector.
*Install Odometer
*Turn key to "on" and with the meter set to "Trip 1", press and hold "Mode" for 10 sec.
Length xxxx (the 17" circumference) will show up (flashing), press "mode" to increase and "set" to decrease the circumference.
The correct setting for 21" should be 2205.
*Press "mode" and "set" simultanously to set it.

The only thing that the "pin 18" do is lock the Odo from adjusting wheelsize.
This looks like it?
-GUV- is offline   Reply With Quote