Thread: Back in Black
View Single Post
Old 02-23-2011, 06:37 PM   #50
StmbtDave
AKA Invisible Dave
 
StmbtDave's Avatar
 
Joined: Aug 2005
Location: Loveland, CO summer - Green Valley, AZ winter
Oddometer: 2,814
Quote:
Originally Posted by Geek View Post
Has anyone had one of the KTM heated grips go bad?

My left grip has stopped working. I checked the wiring and it is all still connected. I guess my next step is to cut the entire wire off at the grip and re-wire it with different wire as there has to be a break in it somewhere
Have a volt/ohm meter? Check the resistance on the grip. You'll have to separate the grip wiring from the switch before checking so you don't pick up the resistance from the good grip. Check at the switch end of the wire as well as right where the wires come out of the grip. If you get an open reading at the switch end of the wires but resistance at the grip, the grip is good but the wiring is bad. If open reading both locations, the grip is bad.

Dave
__________________
Why are we stopping? We don't have time for that!
StmbtDave is offline   Reply With Quote