View Single Post
Old 02-28-2011, 04:19 AM   #105
yamahaman OP
wannabe bike builder
 
yamahaman's Avatar
 
Joined: Jul 2010
Location: melbourne Australia
Oddometer: 223
Laugh finished sprocket carrier



So here we have an action shot on the rotary table, on the mill, having its fingers cut into it.



And this is the finished product about to come off the bench to be de-burred. I put the carrier into a hub and its a snug fit but it works well. I prefered a slightly tighter fit to take into allowance for worn rubbers. I actually have a set of worn cush rubbers (still very servicable, from the wheel I copied) and they are not as tight but still firm to fit so I am very happy, and all this first hit I didnt have to have a second go at the sprocket carrier, all of my measurements worked well. I am quite pleased with the out come.

Sorry about the crappy phone pictures I think you guys/girls get the idea.

__________________
Build it and you will ride

My crazy bike build

yamahaman screwed with this post 02-28-2011 at 04:22 AM Reason: spelling and grammer
yamahaman is offline   Reply With Quote