View Single Post
Old 03-09-2011, 07:44 AM   #175
Burnszilla OP
BurnsMoto.com
 
Burnszilla's Avatar
 
Joined: Jun 2005
Location: Redwood City, California
Oddometer: 1,350
Quote:
Originally Posted by crozz View Post
I finally got around to installing mine. simple installation .. just crimped spade connectors, and attached to the 12v accessory socket on the scrambler. I tested the socket (not the USB), and it was reading around 13v, which I assume is pretty normal (bike was off, it's a permanantly powered socket).

I then plugged in a short iPhone lead that I use with my laptop, and got the dreaded charging not supported message. It shows the plug icon on the phone, but not the charge icon.

Any suggestions ?
Crozz as per my email to you the other day...
Try the cable that came with your iphone. Old ipod and original iphone cables do not charge the newer models.
I saw this problem before and the owner updated his iphone firmware which fixed the problem. (There were charging updates in the firmware.)
Test the usb charger with another device if you have it. If it still doesn't work, I'll send you a replacement.

Burnszilla screwed with this post 03-09-2011 at 08:39 AM
Burnszilla is offline   Reply With Quote