View Single Post
Old 03-17-2011, 10:05 AM   #5
Stagehand's Avatar
Joined: Oct 2004
Location: Shawangunks
Oddometer: 26,887
Originally Posted by Rapid Dog View Post I've heard, so I'll bothe sides need to be the same for some technical reason.
Right now my right side needed to be lower than the left for the carb to not over flow. In otherwais e I had to bend the tang open farther.
That might be a float needle or needle seat issue. Both floats should be providing the same amount of gas in the bowl is whats ultimately important, and usually that means both are the same same. If one side is weird, then the floats are inconsistent, or the float valves are.

Or the overflow pipe is.
Unintentional psychokinesis.
Stagehand is offline   Reply With Quote