Originally Posted by Kevin 007
The jetting is all stock but I will try to find a richer pilot.
what is happening is the slide cutaway is too rich for the pilot, so the transition is rough.
if you go richer on the pilot, it may or may not work.... what really needs to happen is the slide cutaway needs to be leaner. which is a pain and kinda pricey for the risk. and when you change slide cutaway, most likely needle position, main jet, and possibly needle will need to change.
if there is no loss of power, there's no need to mess with it. try lowering the clip (raising the needle) 1 position. it may get rid of it. or turn the airscrew in/out 1/4-1/2 turn...see if that fixes it.