Originally Posted by Cumbacheech
I am pretty sure that there is a cover for the fuse box you can see a little lip on it and a securing tab. Can you not just stuff the fuse box in the air box? I think that is what alot of people do when they do the battery mod.
I agree; it certainly appears the fuse box was designed to accept a lid.
However, if the fuse box lid exisits, I don't know where to find it.
I can certainly lengthen the wires, and place the fuse box inside the battery box.
However, I would prefer to keep things as simple, and foolproof, as possible, and merely install a cover on the fuse box. Perhaps I could place the fuse box inside a rubber boot, or a thick balloon, and secure the open end with a zip tie.
2005 XR650L: Shorai Battery Relocation, Spud Oil Cooler, XR650R C/S Sprocket, Reinforced Subframe, Chain Slipper Roller, Performance Design Lowering Link, Baja Designs Headlight, FMF Hi-Flo Header, ManRacks SD Rack, ManRacks Front Fender Farkle, CST Surge I Front Tire, D952 Rear Tire, Tusk D-Flex Handguards, Uni Air Filter, No-Toil Evolution air filter oil
Spud Rider screwed with this post 03-23-2011 at 07:12 PM