ADVrider - View Single Post

jackpiner57 · 04-20-2011, 06:02 PM

Protoype rack with the mounting plate for RotopaX Pack Mount attachment. As you can see, two bolts go down through the Pack Mount and nuts are welded onto the back side of the plate. It also has rings for bungie attachment. I'll test this over the next few days and if all is well, then I'll make some round corner racks with these features. Suggestions are welcome. Tell me what you want!

EDIT: see page 1 for newest design.

04-20-2011, 06:02 PM	#26
jackpiner57 ^OP Meanderthal Joined: Aug 2005 Location: Northeastern Vermont Oddometer: 1,391	Protoype rack with the mounting plate for RotopaX Pack Mount attachment. As you can see, two bolts go down through the Pack Mount and nuts are welded onto the back side of the plate. It also has rings for bungie attachment. I'll test this over the next few days and if all is well, then I'll make some round corner racks with these features. Suggestions are welcome. Tell me what you want! EDIT: see page 1 for newest design. __________________ Tom - '07 DR-Z400S, '05 DL650 Dual Sport Luggage Racks: DRZ400, DR650, KLR650: http://www.moto-racks.com "I sort of realize there's a fundamental truth to our nature. Man must explore." -CMDR. David R. Scott jackpiner57 screwed with this post 11-29-2011 at 01:59 PM