I relocated my Watsen Design's LED turn signals. I bought these a couple of years ago for my SV650. They are actually made to fit the turn signal slots of the front fairing on a V-Strom, but they have a pretty generic mounting system, they can be adapted to fit almost anything. They were quite expensive but I do like the fact they are made with top quality craftsmanship, and they're small and extremely bright.
I decided to relocate them because I recently swapped my OEM luggage rack for a Pat Walsh Design
rack. Rather than drill holes in the new rack I tried to come up with a more creative mounting solution that would be practical. This is what I ended up with:
Drill a couple of small pilot holes.
Enlarge the pilot holes and drill 2 more small ones for the lock pins.
Use a glue gun to seal the wiring.
Cover it all up with heat shrink tubing for added protection.
Right side installed.
Both installed. Clean and out of the way.
While these suckers may be small, they are extremely
... insanely bright.
They are easily visible
on a sunny afternoon.
Here's the link to a previous blog entry which shows how they were mounted with the OEM luggage rack