Some pictures from last Friday.
Fancy things arrived from Samtec.
Triple row pin headers.
A 3 by 3 array. But that's 4 pins to many. Must make this...
...look like this, by pulling out the 4 corner pins.
A look at how some of this fits together.
The IICE Air has 4 settings. The settings are -10°C, -20°C, -30°C, and no change.
All the bits fit into the box as shown, then filled about half way with epoxy.
Trimming and removing the 4 extra pins. 12 down, 148 to go.