View Single Post
Old 07-01-2011, 09:32 AM   #12
Spud Rider OP
Beastly Adventurer
 
Spud Rider's Avatar
 
Joined: Jun 2008
Location: Idaho
Oddometer: 3,620
Yesterday I decided to change the mounting hardware for the Spud Rollers in my chain guide. For the last 4,700 miles, I have been using two, 5/16 x 2-inch bolts, nyloc nuts and washers to secure the polyurethane chain rollers in my chain guide. Yesterday I switched to to two, 3/8 x 2-inch bolts and nyloc nuts.



Since both the bolt heads, and the nyloc nuts of my new, 3/8-inch hardware are much larger, I decided not to use the washers shown in the photograph above. I'm pleased to report the hex head bolts and nyloc nuts hold my Spud Rollers very securely in the chain guide.

Spud
__________________
2005 XR650L: Shorai Battery Relocation, Spud Oil Cooler, XR650R C/S Sprocket, Reinforced Subframe, Chain Slipper Roller, Performance Design Lowering Link, Baja Designs Headlight, FMF Hi-Flo Header, ManRacks SD Rack, ManRacks Front Fender Farkle, CST Surge I Front Tire, D952 Rear Tire, Tusk D-Flex Handguards, Uni Air Filter, No-Toil Evolution air filter oil

Spud Rider screwed with this post 07-11-2011 at 12:35 PM
Spud Rider is offline