View Single Post
Old 07-29-2011, 08:02 PM   #2
flemsmith
lurk
 
Joined: Apr 2006
Location: Apache Junction, Az
Oddometer: 531
Good luck w/ warranty.....

I had a similar issue on my 2005, but it came after I replaced the plastic quick disconnect with brass; probably a bit too ham-dfiated on my part. I ended up fixing it with the loctite epoxy that's discussed as being fuel resistant in the loctite thread in the garage section. Had to order it, about $18 or so. Been fine for a few years now.

If you decide to take it apart to replace it, there's a tool for the threaded cover that cost about a $100 or so.

Good luck either way.

Roy
flemsmith is offline   Reply With Quote