View Single Post
Old 08-01-2011, 04:57 PM   #1113
Fool - Born This Way
Geoffster's Avatar
Joined: Nov 2008
Location: My Blue Heaven
Oddometer: 1,377
Originally Posted by grpweld View Post
Now I can't find the post that shows the pin orientation
When you look at the unit, you'll see that one of the four corners doesn't have a thermistor protruding through the epoxy. Choosing that pin uses the bike's internal temperature probe.

Going clockwise from the non-thermistor corner is -10, -20, -30.

Don't drop the jumper. You'll never find it. I carry a spare from an old hard drive.

Consider this before arguing with me:
You're an idiot if you argue with a fool!
Geoffster is offline